KEBABLEND / MW FE 200802/5 (development product*)
KEBABLEND / MW FE 200802/5 is a development product based on PPS for the production of soft magnetic components.
PPS - KEBABLEND
Details
KEBABLEND is a wide range of functional compounds, often tailor-made to customer requirements. Under the trade name KEBABLEND, we market magnetizable, thermally or electrically conductive compounds, high-density injection molding materials, compounds for radiation protection applications, detectable plastics and much more.
ISO designation
- PPS-MED
Typical areas of application
Industry sectors
- Automotive
- Electrical and electronics industry
- Household appliances
- Mechanical Engineering
properties
- dimensionally stable
- semi-crystalline
- soft magnetic
Overview of product features
Mechanical properties
Physical properties
Thermal properties
Pre-drying:
Dryer type: dry air dryer.
Temperature: 120 – 130 °C
Drying time: 2 – 3 h
Recommended max. residual moisture: < 0.02 %.
Recommended basic settings:
Melt temperature: 300 – 330°C
Mold temperature: 140 – 160°C
Injection speed: medium – high
Holding pressure: high
Back pressure: 40 – 80bar (spec.)
Machine selection:
Screw: special injection units for magnetic compounds; low-compression screws with non-return valve
Nozzle: Open nozzle
Wear protection: Wear and corrosion protected according to the machine manufacturer’s recommendation suitable for processing magnetic compounds
Injection unit: shot volume = 50-80% of the maximum metering volume
Legal notice
The information in this data sheet is based on our current knowledge and experience. Due to the wide range of possible influences during processing and application of our products, they do not exempt the processor from carrying out his own tests and trials. A legally binding assurance of certain properties or suitability for a specific application cannot be derived from our information.
* FE products are development products which are still in the trial phase. Technical data may still change in the course of product and process development. No final decision has yet been made on the commercialization of FE products. We reserve the right to discontinue the manufacture of FE products without giving further reasons.
Do you have
questions about our
products or services?
Then make an appointment with us.
Our team will be happy to advise you in a
personal conversation or by e-mail.
