KEBABLEND / H 27.1200 PBT
KEBABLEND / H 27.1200 PBT is a functional compound based on PBT with high density.
PBT - KEBABLEND
Details
KEBABLEND is a wide range of functional compounds, often tailor-made to customer requirements. Under the trade name KEBABLEND, we market magnetizable, thermally or electrically conductive compounds, high-density injection molding materials, compounds for radiation protection applications, detectable plastics and much more.
ISO designation
- PBT-MED
Typical areas of application
- Actuating elements
- industrial goods
- Vibration damper
Industry sectors
- Automotive
- Railroad industry
- Household appliances
- Industry
- Mechanical Engineering
- Sports & Recreation
properties
- dimensionally stable
- good chemical resistance
- High density
- semi-crystalline
Overview of product features
Mechanical properties
Physical properties
Rheological properties
Thermal properties
Pre-drying:
Dryer type: dry air dryer
Temperature: 80°C
Drying time: 4-8 h
Moisture content during processing: < 0.02%.
Recommended basic settings:
Melt temperature: 250 – 260°C
Mold temperature: 90 – 120 °C
Injection speed: high
Back pressure: 40 – 80bar (spec.)
Machine selection:
Screw: Low compression screw with non-return valve
Nozzle: Open nozzle
Wear protection: Wear and corrosion protected according to machine manufacturer’s recommendation, suitable for processing highly filled plastics
Injection unit: Shot volume = 50-80% of maximum metering volume
Other important processing notes:
The residence time of the melt in the barrel should be kept as short as possible. If this is not observed, segregation can occur due to the large difference in density between the filler and the polymer if the dwell time is too high. The optimum is: metering time = cooling time. A medium back pressure leads to optimum homogenization. Due to the high filler content, the injection moldinge quipment, including mold cavities, must be equipped with suitable protection against abrasive wear. When designing parts and molds for processing KEBABLEND / H 27.1200 PBT, high shear rates must be avioded to prevent excessive wear. This includes suitable dimensions of cold/hot runner systems and gating. Areas of the mold in which high shear rates cannot be avoided should be designed as exchangeable mold inserts. We recommend to consider shortened maintenance intervals and increased wear in your calculations.
Legal notice
The information in this data sheet is based on our current knowledge and experience. Due to the wide range of possible influences during processing and application of our products, they do not exempt the processor from carrying out his own tests and trials. A legally binding assurance of certain properties or suitability for a specific application cannot be derived from our information.
Do you have
questions about our
products or services?
Then make an appointment with us.
Our team will be happy to advise you in a
personal conversation or by e-mail.
