KEBALLOY ECO FE 220404 R-PET
KEBALLOY ECO FE 220404 R-PET is a recycled, medium viscosity PET grade (polyethylene terephthalate) approved for direct food applications. The material is supplied as crystallized granules. This grade is produced from 100% post-consumer bottle flakes and has a light green color.
PET - KEBALLOY ECO
The name KEBALLOY ECO stands for a product range of engineering plastics and high-performance compounds based on post-consumer or post-industrial recyclate. KEBALLOY ECO compounds enable significant CO2 savings compared to virgin materials and meet the highest requirements in terms of product properties and their uniformity from batch to batch. KEBALLOY ECO compounds also enable customer- or application-specific microcycles of engineering plastic parts and are thus a valuable contribution on the way to a circular plastics economy.
Typical areas of application
- Glasses frames
- Filter cups
- Crockery and cutlery
- industrial goods
- Cosmetic packaging
- Food packaging
- Sports & Leisure Articles
- Household appliances
- Food processing industry
- Sanitary industry
- Sports & Recreation
- dimensionally stable
- compliant for food contact (according to 10/2011 EC)
- approved for food contact (EU and FDA)
Overview of product features
Type of dryer: Dry air dryer.
Processing residual moisture: <0.005%.
drying temperature: max. 160°C
typical drying time: 4 – 6h
Processing recommendations for amorphous processing:
Melt temperature: 270 – 300°C
hot runner temperature: 280 – 290°C
mold temperature: <20°C
Injection speed: slow to medium
Back pressure: 40 to 80 bar specific
Holding pressure profile: hold 50 to 70 % of the injection pressure for 1 to 2 s and then allow to fall over a ramp. For very thin-walled or thick-walled parts, the optimum holding pressure may differ from the percentage recommendation.
The information in this data sheet is based on our current knowledge and experience. Due to the wide range of possible influences during processing and application of our products, they do not exempt the processor from carrying out his own tests and trials. A legally binding assurance of certain properties or suitability for a specific application cannot be derived from our information.
* FE products are development products which are still in the trial phase. Technical data may still change in the course of product and process development. No final decision has yet been made on the commercialization of FE products. We reserve the right to discontinue the manufacture of FE products without giving further reasons.
Do you have
questions about our
products or services?
Then make an appointment with us.
Our team will be happy to advise you in a
personal conversation or by e-mail.