pattern
Mehr aus
Polymer.
pattern

Our product range

Our range of thermoplastics is divided into our own compounds and equally high-quality distribution products from the companies EMS Grivory and KOLON ENP, Inc. This carefully selected range, which has been tried and tested in practice, results in a product selection with countless application possibilities and product properties, which we supplement with our numerous services for your product.

Get an overview of the materials available from us. Our technically and commercially experienced contact persons will be happy to answer any questions you may have about product properties and individual offers.

POM
POM (polyoxymethylene or polyacetal) belongs to engineering thermoplastics and is characterized by high dimensional stability, low coefficients of friction, low wear, and high stiffness and good flexibility.

Trade names: KEBAFORM® and KOCETAL®.
Details
PBT
PBT (polybutylene terephthalate) is an engineering thermoplastic characterized by its high stiffness and strength, good electrical properties, as well as excellent dimensional stability and high continuous service temperature.

Trade name: KEBATER®

Details
PPS
PPS (polyphenylene sulfide) is a high performance plastic with very high chemical resistance and continuous service temperature. It is inherently flame retardant and enables plastic parts with extreme rigidity, strength and temperature resistance.

Trade name: KEBATRON

Details
LCP
LCP (Liquid Crystal Polymers) are liquid crystalline polymers characterized by their dimensional stability and chemical resistance at high temperatures. They are particularly suitable for components with thin walls and long flow paths.

Trade name: KEBAFLOW

Details
PA
PA (polyamides) belong to the engineering thermoplastics and are characterized by a unique combination of stiffness, strength and toughness. They impress with good chemical resistance and a wide range of applications.

Trade names: Grilon and Grilamid
Details
PPA
PPA (polyphthalamides) are among the high-performance polyamides and are particularly impressive due to their very high stiffness and strength, even at elevated temperatures and after water absorption. They are particularly suitable as metal substitutes.

Trade name: Grivory
Details
PEEK, PEK, PEKK
PEEK, PEK and PEKK belong to the group of polyaryletherketones and are high-performance plastics characterized by extreme temperature and chemical resistance, good sliding and wear behavior and inherent flame retardancy.

Trade name: KEBAPEAK
Details
TPE
TPEs are a group of materials known as thermoplastic elastomers. They have a similar property profile to crosslinked elastomers ("rubber"), but can be thermoplastically processed at low cost and recycled without difficulty.

Trade name: KEBAFLEX
Details
PC/ABS
PC/ABS (polycarbonate / acrylonitrile butadiene styrene) impresses with good processability and excellent mechanical properties of PC. The application area of this material is mainly chrome-plated and painted parts in automotive interiors.

Trade name: KEBALLOY
Details
Shielding compounds
The combination of plastic and shielding fillers enables its use as an environmentally friendly alternative to lead in medical radiation protection applications, e.g. in X-ray equipment and rooms or nuclear medicine.

Trade name: KEBABLEND / RS
Details
Compounds with high density
By combining mostly semi-crystalline plastics (PA, PBT, PP, etc.) with inorganic fillers (mineral, metal, ceramic), high-density materials are created that can be thermoplastically processed and provide unique properties.

Trade name: KEBABLEND / H
Details
Electrically conductive compounds
The use of electrically conductive fillers in engineering plastics enables electromagnetic shielding (EMC) and electrostatic discharge (ESD) for applications e.g. in electromobility, medical technology or mechanical engineering.

Trade name: KEBABLEND / EC
Details
Magnetic compounds
Magnetic compounds are thermoplastically processable, hard or soft magnetic materials for the production of polymer bonded magnets (PBM), e.g. for sensors, actuators, pump rotors or holding magnets.

Trade names KEBABLEND / M and KEBABLEND / MW
Details
Compounds for 3D effect painting
3D effect painting creates high-quality, technically appealing surface designs that can be customized up to a quantity of 1, with an enthusiasm factor and, compared to film back molding, often also a cost advantage.

Trade name: KEBALLOY 3D

Details
Recycling Compounds
High-quality compounds based on recyclate, but with properties and documentation like virgin material, are indispensable for achieving the circular economy, decarbonizing the industry and producing sustainable plastic products.

Trade name: KEBALLOY ECO

Details
Tribocompounds
To reduce friction and wear, plastics (e.g. POM, PA, PBT, PEEK, PPS or TPE) are equipped with tribologically effective additives to make them optimally suited for use as plain bearings, gears, rollers, etc.

Trade name: KEBABLEND / WR

Details
THERMALLY CONDUCTIVE COMPOUNDS
Thermally conductive plastic compounds combine free moldability and cost-effective production in the injection molding process with interesting thermal properties. Thermally conductive, electrically conductive or insulating, flame retardant, and mechanically resilient - the optimum combination, e.g. battery components in electromobility.

Trade name: KEBABLEND / TC
Details
Functionalized compounds
Highly filled, thermoplastic processable plastics with exceptional property profiles: magnetic, soft magnetic, thermally conductive, electrically conductive, radiation shielding, high density and more.

Trade names: KEBABLEND
Details

Here you can find more information about our products.

Here you can find more information about our products.

POM

POM belongs to the engineering thermoplastics and is characterized by its high dimensional stability, low coefficients of friction and high stiffness.

As a result, it is preferred for use in the automotive industry and electrical engineering.

  • unreinforced
  • reinforced 10 – 30 %
  • Hot diesel resistant
  • impact modified
  • slip modified
  • electrically conductive
  • emission-reduced
PBT

PBT is a thermoplastic material characterized by its high rigidity, strength and excellent dimensional stability. This material is used primarily in electrical engineering and vehicle construction.

  • unreinforced
  • reinforced 10 – 50%
  • flame retardant UL 94-V0
  • PBT-blends
PA

Polyamides belong to the engineering thermoplastics and are characterized by their high toughness and good sliding properties. They are excellently suited for use as metal substitutes, where their high mechanical strength is impressive.

PA 6, PA 66, PA 66 + PA 6, PA 12, amorphes PA

PPA

PPA is one of the high-performance polyamides and is particularly impressive due to its extreme heat resistance and mechanical strength.

PPA is used in the automotive industry for gasoline and cooling lines.

PPA-Blends, HT-PPA

PPS

PPS is a thermoplastic and offers very high chemical resistance and stiffness. Thanks to its outstanding properties, PPS is used in components subject to high mechanical, electrical, thermal and chemical stresses in the automotive and electronics sectors.

  • linear and networked
  • reinforced 40% – 65%
LCP

LCP are liquid crystalline polymers that are characterized by their dimensional stability and chemical resistance at high temperatures. Their field of application is primarily in mechanical and vehicle engineering as well as in the electrical industry.

  • HDT 270°C und 300°C
  • glass fibre reinforced
  • hybrid reinforced
PEEK & more

PEEK is a high-temperature-resistant thermoplastic that is characterized by its very high chemical resistance. Its main applications are in the automotive industry and as an insulating material in high-voltage engineering.

  • unreinforced
  • glass fibre reinforced
  • carbon fiber reinforced
PC/ABS

PC/ABS is convincing due to the combination of the good processability of ABS and the excellent mechanical properties of PC.

This material is used primarily in automotive interiors.

  • Galvanotype
  • unreinforced
TPE

TPEs are thermoplastic elastomers that can be deformed by heating. They are as soft as rubber and are used in a wide variety of applications.

TPE-S: SEBS – Compounds

  • Shore A 10 – D 55
  • adhesion modified, hard/soft
  • filled and unfilled

TPE-V: EPDM/PP – Compounds

  • Shore A 35 – D 50
  • low-emission
Shielding compounds

KEBABLEND / RS are products that can be used for radiation protection.

We develop customized KEBABLEND / RS products based on the following polymers:

  • EBA
  • PA 12
  • PPS
  • PPA
Compounds with high density

KEBABLEND / H is the name of our heavy materials that can be injection molded into high-density parts. Kebablend / H is based on a wide variety of polymers with heavy filler combinations. However, restrictions on the volume concentration depending on the desired polymer must be observed.

We develop customized KEBABLEND / H products based on the following polymers:

  • EBA
  • PA 12
  • PPS
  • PPA
Electrically conductive compounds
KEBABLEND / EC – electrically conductive compounds

 

Under the trade name KEBABLEND / EC, BARLOG Plastics GmbH markets a range of plastics with electrically conductive fillers, for the manufacture of components with good electrical properties. From antistatic behavior to good electrical conductivity and shielding properties, this product group offers a lightweight alternative to metals with a high degree of design freedom. Typical applications of KEBABLEND / EC are housings in automobiles with minimal weight for the shielding of electromagnetic fields or conductive components in the field of electrical engineering.

 

Why KEBABLEND / EC?

  • up to 50% lighter than aluminum
  • Cost reduction of the overall system
  • Design freedom in the injection molding process
  • EMC-compatible component design
  • Possibility of function integration

 

KEBABLEND / EC electrically conductive compounds are generally tailor-made for specific customers and applications. The choice of base polymer for the electrically conductive fillers and other fillers and reinforcing materials is made in close consultation with our customers’ development engineers.

Functionalized compounds for 3D effect painting
KEBALLOY 3D

Preferences:

Designed for painting plastic parts with a 3 dimensional effect.

  • Maximum individualization

Flexible designs, up to quantity 1

  • Suitable for production even for large series

No additional effort for tooling and setup costs or logistics costs

  • Detailed contours and logos

Through magnetism, the necessary information is stored in the surface of the component

 

Special features: 

  • Patented system of material and process engineering
  • Extrudable and injection moldable plastic compounds with magnetic filler particles
  • Insertion of the magnetic pattern by writing with a magnetic pen or stamp
  • 2 layer system (base coat + clear coat)
  • Plastics such as ABS, PC and PC/ABS can be painted without primer, others such as PA6 or PBT require a primer or undercoat.

 

Cost analyses by German automakers have confirmed:
Components with KEBALLOY 3D effect coatings from BARLOG bring a clear advantage in the competition with today’s common, foil-backed design elements in the cost-benefit comparison due to their enthusiasm factors!

Magnetic compounds
KEBABLEND / M and MW – Magnetic materials for the production of injection molded magnets

 

Under the trade name KEBABLEND / M and MW BARLOG Plastics GmbH sells functional compounds for the production of injection molded magnets as well as soft magnetic components.

 

Why KEBABLEND / M?

  • Hard magnetic
  • Can be magnetized in the injection molding process (inmold magnetizing)
  • High remanence and coercivity
  • High design freedom
  • good toughness and strength
  • media resistant

 

Why KEBABLEND / MW?

  • Soft magnetic
  • High permeability
  • Optimally suited for shielding or magnetic field guidance
  • High design freedom
  • good toughness and strength
  • media resistant

 

Recycling Compounds
KEBALLOY ECO – Recycling Compounds

 

BARLOG Plastics GmbH markets recycling compounds under the trade name KEBALLOY ECO.

 

Why KEBALLOY ECO?

  • Food contact applications possible (PET)
  • Selected recyclates from stable raw material sources – Post Consumer and Post Industrial
  • High quality standards with specification of material characteristics
  • Customized recipes adjustable
Tribological compounds
KEBABLEND / WR – Tribological compounds

 

Under the trade name KEBABLEND / WR, BARLOG Plastics GmbH markets tribologically optimized compounds for moving components, such as plain bearings, gears, rollers, sliders in countless applications. Incorporated lubricants and reinforcing materials improve the wear, friction and running-in behavior of polymers and thus of the tribological system. This results in maintenance-free or low-maintenance systems that function without additional lubrication. In lubricated assemblies, the emergency running properties of these materials come into play, thus increasing safety for the designer and the user.

 

Why KEBABLEND / WR?

  • Improved sliding and wear behavior compared to unmodified plastics
  • Maintenance-free or low-maintenance systems
  • No additional lubrication necessary
  • Tailor-made for your requirements
  • Wide range of products as standard assortment

 

KEBABLEND / WR tribologically modified compounds can basically be adjusted on the basis of all engineering plastics and modified to suit the respective application by using lubricants such as PTFE, MoS2, graphite and silicone oil, as well as wear-reducing and reinforcing additives such as carbon, glass and aramid fibers, mineral or ceramic.

Thermally conductive compounds
KEBABLEND / TC – thermally conductive compounds

 

Under the trade name KEBABLEND / TC, BARLOG Plastics GmbH markets a range of thermally conductive plastics for the manufacture of components in all areas of application that require thermal management, e.g. in the cooling of electrical and electronic components or the heating of fluid lines. KEBABLEND / TC is used in automotive applications, LED technology, photovoltaic components and in all other areas where thermal management plays a role.

 

Why KEBABLEND / TC?

  • up to 50% lighter than aluminum
  • Cost reduction of the overall system
  • Design freedom in the injection molding process
  • Possibility of function integration
  • Electrically insulating types available

 

Due to the wide range of requirements in thermal management, KEBABLEND / TC thermally conductive compounds are usually tailor-made to meet specific customer and application needs. The choice of base polymer, thermally conductive fillers and other fillers and reinforcing materials is made in close consultation with our customers’ development engineers.

pattern

Do you have
questions about our
products or services?

Then make an appointment with us.
Our team will be happy to advise you in a
personal conversation or by e-mail.

You have data to review? Please upload as PDF, JPG and or common 3D file. The data should not exceed the max. size of 30 MB

Your request has been sent.
Your request could not be sent. Please try again or email us: kontakt@barlog.de.
HelloHand
We are happy to help if you have any questions about our products or services
Your request

You have data to review? Please upload as PDF, JPG and or common 3D file. The data should not exceed the max. size of 30 MB

Your request has been sent.
Your request could not be sent. Please try again or email us: kontakt@barlog.de.
Send request
Send request
Subscribe to newsletter

Would you like to use our service and always stay up to date? Simply subscribe to our newsletter.

Your request has been sent.
Your request could not be sent. Please try again or email us: kontakt@barlog.de.
Cookie-Einstellungen
Auf dieser Website werden Cookie verwendet. Diese werden für den Betrieb der Website benötigt oder helfen uns dabei, die Website zu verbessern.
Alle Cookies zulassen
Auswahl speichern
Individuelle Einstellungen
Individuelle Einstellungen
Dies ist eine Übersicht aller Cookies, die auf der Website verwendet werden. Sie haben die Möglichkeit, individuelle Cookie-Einstellungen vorzunehmen. Geben Sie einzelnen Cookies oder ganzen Gruppen Ihre Einwilligung. Essentielle Cookies lassen sich nicht deaktivieren.
Speichern
Abbrechen
Essenziell (1)
Essenzielle Cookies werden für die grundlegende Funktionalität der Website benötigt.
Cookies anzeigen
Statistik (2)
Statistik Cookies tracken den Nutzer und das dazugehörige Surfverhalten um die Nutzererfahrung zu verbessern.
Cookies anzeigen