KEBALLOY ECO FE 191103 R-PET (Development product*)
KEBALLOY ECO FE 191103 PET is an electrically conductive PET compound with glass and carbon fiber reinforcement. The PET base polymer is made from 100% post-consumer recycled PET bottles and the carbon fibers are 100% post-industrial recycled. KEBALLOY ECO FE 191103 PET is thus a sustainable alternative to other electrically conductive structural materials.
PET - KEBABLEND
Details
ISO designation
- PET-GF-CF(REC)
Typical areas of application
- Fasteners
- Hardware
- Housing
- Sliding elements
- Bearing bushes
- Structural components
Industry sectors
- Automotive
- Railroad industry
- Electrical and electronics industry
- Industry
- Agriculture
- Mechanical Engineering
- Furniture industry
- Sports & Recreation
properties
- dimensionally stable
- electrically conductive
- good chemical resistance
- good aging behavior
- high continuous used temperature
- High strength
- High stiffness
- semi-crystalline
Overview of product features
Physical properties
Mechanical properties
Thermal properties
Pre-drying:
Dryer type: dry air dryer
Temperature: 80°C
Drying time: 4-8 h
Moisture content during processing: < 0.02%.
Recommended basic settings:
Melt temperature: 260 – 290°C
Mold temperature: 140 – 160 °C
Injection speed: high
Back pressure: 40 – 80bar (spec.)
Machine selection:
Screw: 3-zone screw with non-return valve
Nozzle: Open nozzle or shut-off nozzle
Wear protection: Wear protected according to machine manufacturer’s recommendation, suitable for processing fiber reinforced plastics
Injection unit: Shot volume = 50-80% of the maximum metering volume
Legal notice
The information in this data sheet is based on our current knowledge and experience. Due to the wide range of possible influences during processing and application of our products, they do not exempt the processor from carrying out his own tests and trials. A legally binding assurance of certain properties or suitability for a specific application cannot be derived from our information.
* FE products are development products which are still in the trial phase. Technical data may still change in the course of product and process development. No final decision has yet been made on the commercialization of FE products. We reserve the right to discontinue the manufacture of FE products without giving further reasons.
Do you have
questions about our
products or services?
Then make an appointment with us.
Our team will be happy to advise you in a
personal conversation or by e-mail.
